DEVELOPMENT OF AN EXPERIMENTAL SAMPLE OF ARCHIMEDES SCREW TURBINE DESIGNED FOR LOW PRESSURE

Yusufjonov, Dostonbek

doi:10.66073/researchfocus.v3i7.810

ARTICLE 2024 Vol 3 · No 7 EN 7d2705183afa

DEVELOPMENT OF AN EXPERIMENTAL SAMPLE OF ARCHIMEDES SCREW TURBINE DESIGNED FOR LOW PRESSURE

Dostonbek Yusufjonov Russian State University of Oil and Gas, Russia

Research Focus International Scientific Journal, 3(7), 11–15 · ISSN 2181-3833

To‘liq matn (PDF) 643 KB DOI Nashriyot sahifasi

Annotatsiya

The article develops an experimental model of a low-pressure Archimedean screw turbine and installs a 100 W generator on it. The studies were carried out at a turbine deflection angle from 100 to 550, and the permissible angle of its deflection was 450. Having found the optimal angle of the Archimedean screw when using a turbine, it was possible to increase the efficiency factor.

Kalit so‘zlar

Archimedes Screw generator hydro power flow rate deflection angle inner diameter outer diameter

Iqtibos keltirish

Yusufjonov, Dostonbek (2024). DEVELOPMENT OF AN EXPERIMENTAL SAMPLE OF ARCHIMEDES SCREW TURBINE DESIGNED FOR LOW PRESSURE. Research Focus International Scientific Journal, 3(7), 11–15. https://doi.org/10.66073/researchfocus.v3i7.810

Identifikator: https://rf-library.uz/article/7d2705183afa/development-of-an-experimental-sample-of-archimedes-screw-turbine-designed-for
DOI: 10.66073/researchfocus.v3i7.810
Litsenziya: Copyright (c) 2024 Research Focus International Scientific Journal
Nashriyot: LLC Ilm-fan va innovatsiyalar akademiyasi
Repozitoriyga qo‘shildi: 2026-08-07